UP TO 24 MONTHS INTEREST FREE
OR BUY NOW PAY
DJ NOW...PAY LATER

Powersoft M30D


Deposit:£69.95
24 Payments of:£55.38

Total Price:£1,399.00

QUANTITY
Finance Calculator

Finance Options




Deposit Amount


Like all M Series models, the M30D is optimized for 4Ω, and with its output power ideal for small to medium sized sound systems where e.g. no more than two 8Ω loads are connected in parallel to an amplifier channel: Why overpaying for amplifiers capable of driving 2Ω loads?

Alternatively, the M30D can drive constant voltage lines directly where multiple loudspeakers are required, but only few different signals.

Maximum efficiency warrants minimum current draw, heat dissipation and power consumption, resulting in "green" products, saving the user a substantial amount of money over time.

FEATURES

Power supply

  • Advanced switch-mode power supply technology for high performance and compact size
  • Fixed frequency switch mode output
  • Patented output filter with ripple cancellation network

Protections
Fully protected circuit design with:

  • Ac protection: shut down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
  • Thermal protection: output stages operating temperature up to 75 °C (167 °F)
  • Temperature controlled continous variable speed fan, front to back airflow

General

  • Direct drive constant voltage, 70V/100V Hi-Z distributed lines**
  • Compact size - all models only 1 RU for reduced rack cost and space
  • Light weight - all models only 7.4 kg (16 pounds) for easier racking and shipping
  • Neutrik XLR balanced inputs with loop thru XLR and Speakon outputs connectors
  • Recessed stepped attenuators
  • Modular construction
  • Full four years warranty

SPECIFICATIONS

General  
Number of channels 2
   
Output power Single channel mode Distributed line* Bridge mode
    4 Ω 8 Ω   70V 100V   8 Ω    
    1500 W 900 W   1200 W 1500 W   3000W    
Max output voltage / current 135 Vpeak / 65 Apeak 100 Vpeak 140 Vpeak 270 Vpeak
   
AC Main Power  
Power supply Universal, regulated switch mode
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V   230 V
Idle 37 W 0.6 A   37 W 0.3 A
1/8 of max output power @ 4 Ω 530 W 7 A   530 W 3.54 A
1/4 of max output power @ 4 Ω 1024 W 13.04 A   1024 W 6.52 A
   
Thermal  
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V   230 V
Idle 126 BTU/h 31.8 kcal/h   126 BTU/h 31.8 kcal/h
1/8 of max output power @ 4 Ω 529 BTU/h 133.3 kcal/h   529 BTU/h 133.3 kcal/h
1/4 of max output power @ 4 Ω 935 BTU/h 235.6 kcal/h   935 BTU/h 235.6 kcal/h
   
AUDIO  
Gain 32dB, 30dB, 28dB, 26dB, 24dB, 22dB, 20dB, 18dB, 14dB, 4dB, -∞, user selectable
Input sensitivity 2.13 V / 8.8 dBu
Max input level 6 V / 17.7 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 108 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1kHz
THD+N 0.08% @ 1/2 full power
IMD 0.02%
Input impedance 10 kΩ balanced
Slew rate 40 V/μs @ 8Ω, input filter bypassed
Damping factor

> 5000 @ 100 Hz

 

Front panel  
Indicators and Controllers 1 x LED - Status
1 x LED - Over-temperature protection
2 x LED bar - Signal level + CLIP
2 x Knob - Level attenuator (stepped)
1 x Power switch - 
Connectors  
AC main 1 x IEC C14 connector - 15 A max (region-specific power cord provided)
Audio signal input 2 x XLR - Signal input
Auxiliary voltage 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - External voltage connector (DSP version only)
Audio out (link through) 2 x XLR - Signal output (link through)
Loudspeakers 2 x speakON - Neutrik NL4MD
Network/data 1 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
1 x Rj45 socket - RS485 data connection (non-DSP version)
   
Construction  
Dimensions (L x H x W) 483 mm x 44.45 mm x 358 mm (19.0 in x 1.8 in x 14.1 in)
Weight 7.4 kg (16.3 lb)



* Data is suject to change without notice.